myCCTV Recovery - Multiple Use License
myCCTV Recovery - Multiple Use License
myCCTV Recovery - Multiple Use License
myCCTV Recovery - Multiple Use License
myCCTV Recovery - Multiple Use License

myCCTV Recovery - Multiple Use License

Version: 3.17
Last update: 24.04.2024
License type:
Operating system:

myCCTV Recovery is a specialized application geared to restore videos deleted or lost from closed-circuit television appliances. Adjusted to deal with the proprietary formats used in CCTV systems of most popular suppliers and enhanced with an intelligent reconstruction engine, the program is capable of providing the recovery result for surveillance recordings that cannot be achieved by any general-purpose solution. Meanwhile, the Multiple Use License enables unlimited usage of the software over the course of the desired period and thus allows utilizing its potential to the utmost.

An optimal tool to cope with the loss of CCTV footages

The software serves as an irreplaceable assistant when it comes to data recovery from CCTV systems required under a variety of circumstances:
System malfunction or failure
System malfunction
or failure
Storage device issues
Storage device
Storage initialization and/or formatting
Storage initialization
and/or formatting
Deletion of footages
of footages
Forensic investigation
The application works with surveillance units of various manufacturers:
  • ADT
  • Aura
  • Axxin
  • BestDVR
  • Beward
  • Clinton Electronics
  • Dahua
  • EverFocus
  • GSP
  • Hikvision
  • Human
  • IDIS
  • Infinity
  • JWC
  • Keno
  • Kodicom
  • LG
  • Lorex
  • Microdigital
  • Nadatel
  • Pinetron
  • Proline
  • Rifatron
  • S1
  • Samsung
  • Siemens
  • Sky
  • T.O.M. Technology

Key features

Comprehensive methodology focused on CCTV data recovery
Comprehensive methodology focused on CCTV data recovery Comprehensive methodology focused on CCTV data recovery

Designed specifically for CCTV, the software embraces a set of algorithms optimized for work with this type of appliances that may employ specific file systems, various stream formats, video/audio codecs and almost any data carrier – an internal or external hard disk drive, USB flash drive, memory card, etc. The lengthy list of supported devices includes Hikvision, Dahua, Lorex, Samsung and many lesser-known brands.

Relying on the principle "Recover everything that can be found"
Relying on the principle "Recover everything that can be found" Relying on the principle "Recover everything that can be found"

The software conducts a profound analysis of the problem storage and locates footages of all possible formats. Yet, even when files are absent or were severely damaged, the program is still able to reconstruct the recording by analyzing each frame of video, finding the metadata that is crucial for its restoration, concatenating the related frames into continuous streams and wrapping them into universal containers.

Special technology for frame validation
Special technology for frame validation Special technology for frame validation

The application is able to check every single frame of a video stream and spot the corrupted ones. This internal validation mechanism allows it to ensure that the video files provided to the user as the result of data recovery won’t turn out to be damaged and non-readable.

Embedded video transmuxing techniques
Embedded video transmuxing techniques Embedded video transmuxing techniques

On the final step of the data recovery procedure, the program saves the restored footage in the *.AVI format which can be opened with any standard media player or other viewing software. At the same time, full preservation of the initial content of frames and thus forensic credibility of the video data is guaranteed.

Helpful supplementary functionality
Helpful supplementary functionality Helpful supplementary functionality

The software offers special scan filters that make it possible to recover recordings made on an exact date or with a certain surveillance camera. Also, the functions of previewing video files and sorting them by date or camera they were taken with may considerably facilitate the copying process.

Frequently asked questions

  • You can download the free Trial version of myCCTV Recovery from this webpage and use it to make sure that the product corresponds to your requirements. The trial software will present all the recovered videos and allow copying files with a size of less than 768 KB. Copying bigger files requires activation of the software license.
  • Download the application by pressing the "Free download" button on this webpage. Avoid using the disk from which the data was lost for saving this file. After that, you will get an executable installation file which can be run in your operating system. Open it and follow the instructions.
  • This license type implies that the software is available for usage on a specific computer for the entire license’s validity term you choose at purchase. During this period, it is possible to perform any number of scan operations and save any amount of recovered videos without trial limitations.
  • The Multiple Use License is a perfect choice when you want to use the program regularly during a certain period. However, if you are going to perform a video recovery procedure only once, you may consider purchasing the One-Time Use License, which allows saving the results of a single scan operation performed by means of the program.
  • The Multiple Use License can be ordered via the "Buy License" button on this webpage. It will be provided after a one-time payment of the corresponding license fee. Its activation is possible either via the Registration Code or the Software-based Access Key.

    The subsequent actions will vary depending on the chosen activation type:

    The Registration Code is a special sequence of symbols issued to the person's name, which authorizes their use of the software on a specific computer for the defined period. It should be entered directly into the program to make it operate without trial limitations as long as the license remains in effect.

    In this case, you will need to take the following steps for activation:

    1. Download the Trial version of myCCTV Recovery from this webpage. Test the program to ensure it is suited to your demands.
    2. If the product meets your expectations, go to the License dialog by pressing the button in the upper right corner and copy the System ID you will see in the respective field.
    3. After that, you may proceed to the purchase by pressing the "Buy License" button on this webpage.
    4. Verify the chosen license type, its duration period in particular, and press "To Checkout".
    5. During the checkout process, provide the copied System ID in the dedicated box that follows the billing form.
    6. After the payment, the Registration Code will be released based on your System ID and sent to the email specified in the order.
    7. Use your Registration code to activate the software in the License dialog. After successful activation, you will be able to utilize it on the dedicated computer till the expiration of the license validity term.

    The Software-based Access Key is a Sentinel SL electronic key established in the system based on its unique "fingerprint". It should be installed on the computer in order to bind it to concrete hardware on which the program will be used. As long as a valid Access Key is stored in the system, the application will communicate with it and thus run consistently on that specific machine.

    In this case, the activation procedure is performed remotely by a technical specialist from SysDev Laboratories. Please note that stable internet connection is required to enable remote access to your computer.

  • Our sales partner Digital River provides a variety of payment options, including Visa/MasterCard, PayPal, American Express, Discover, WebMoney, wire transfer, etc. and allows performing the payment in any currency. For more details, please, check the payment method guide page on their website.
  • A Registration Code will be issued once the payment is processed and delivered to the email address specified in the order. The delivery is electronic and usually takes about 15-45 minutes.

    In case of a Software-based Access Key, you will be contacted via e-mail by a technical specialist from SysDev Laboratories and provided with further instructions.

Leave a review

Supported file formats
  • MPEG4, MJPEG, H264.

Supported file systems
  • Windows: NTFS, FAT/FAT32, exFAT;

  • macOS: HFS+, APFS;

  • Linux: Ext2, Ext3, Ext4, XFS, JFS, ReiserFS, Btrfs;

  • CCTV file systems: WFS, DHFS, HIK, Mirage, Pinetron, BKFL, etc.;

  • File systems used as a metadata source: UAVtech.

Supported codecs
  • Video codecs: Motion-JPEG, Motion-JPEG2000, ASF (MPEG 4 Part 2), AVC (h.264), HEVC (h.265), MPEG/MPEG2;

  • Audio codecs: PCM, ADPCM, G.711/A-Law.

Supported stream formats
  • umv, mdig, rsfm (Rsfs), dch264 (DHFS), ssf, xql, dhav (DHFS), avix1, rim, lvf, keno, aura, human, siemens, hav, axs , idis, idis2, cli_el, lg_tfs, s1, ss_nsys, ndav, ndap, adtssf, govctv, cenova, tango, acumen, ftvt, bnk, everfocus, iseeq, commax, rms, SVN, SHFL, etc.

Supported storages
  • Personal computers, laptops, external hard disk drives, USB flash drives, SD/miniSD/microSD cards, disk images.

Additional tools and features
  • Auxiliary options: files preview, search, sorting (including by date, surveillance camera), filtering and others.

Trial limitations
  • The software will copy files the size of which doesn’t exceed 768 KB.

Licensing information
  • The Multiple Use License is granted for continued use of the software during the specified period and on a particular computer system, uniquely identified by the ID generated for it the program. In case it is preferable to apply the utility only once, the One-Time Use License should be considered.

Supported host operating systems
  • Microsoft Windows®: starting from Windows® XP with Service Pack 3 and later.

Supported host computer architectures
  • Intel Architecture, 32-bit (IA-32, x86);

  • AMD64 (x86-64).

Minimal configuration
  • Any of the supported host operating systems;

  • at least 20 MB of free space on the disk for the executable files of the software;

  • at least 8 GB of RAM.

Recommended configuration
  • A 64-bit edition of any of the supported host operating systems;

  • over 1 GB of free space on the disk for the program and temporary files;

  • at least 32 GB of RAM and 4 logical cores CPU;

  • any web browser.