Network Storage Recovery for Synology NAS

Network Storage Recovery for Synology NAS

Version: 1.3
Last update: 15.02.2019
License type:
Operating system:

Network Storage Recovery for Synology NAS is an efficient utility designed for the purpose of data recovery from NAS units of Synology. The software enables effortless retrieval of files from devices of both DiskStation and RackStation series, even ones based on Synology Hybrid RAID, and owing to its capability to operate via LAN, it not necessary to disassemble the NAS box and connect the drives to the computer.

Optimal response to data loss from Synology NAS

The program serves for painless data recovery from a bootable NAS device that was affected by one of the following accidents:
Accidental deletion
Accidental
deletion
Storage formatting
Storage
formatting
RAID failure
RAID
failure
File system corruption
File system
corruption
software malfunction
Other
reasons

Key features

1/5
Work with the drives without opening NAS
Work with the drives without opening NAS Work with the drives without opening NAS

When the NAS unit is booted, the software obtains access to the storage via a networking protocol and enables the recovery of data from its disks via LAN without any manipulations with the hardware internals. There is no need to worry about the warranty, vacant ports or any additional equipment – the procedure can be performed even when the disassembly is not possible or may lead to undesirable consequences.

2/5
Custom-tailored data recovery techniques
Custom-tailored data recovery techniques Custom-tailored data recovery techniques

Developed specially for NAS devices of the DiskStation and RackStation series produced by Synology, the program takes into account the peculiarities of storage technologies employed by these models. Therefore, it allows avoiding the compatibility issues that may occur when non-specialized software is used and achieving the maximum effectiveness of data recovery.

3/5
Automatic reconstruction of RAID
Automatic reconstruction of RAID Automatic reconstruction of RAID

For Synology NAS models that are based on the RAID technology, the application can automatically detect the parameters of the array and puts the storage together, including Synology Hybrid RAID, standard mdadm RAID levels (RAID 0, RAID 1, RAID 5, RAID 6) and non-RAID drive architectures (SPAN).

4/5
Possibility of manual RAID assembly
Possibility of manual RAID assembly Possibility of manual RAID assembly

Though the software automatically reads out the configuration of the array from the available metadata, there are still cases when this information gets lost or severely corrupted. Under such circumstances, the user can define RAID manually by specifying its level, stripe size, etc. and build it in a virtual mode for further data recovery operations.

5/5
Easy and smooth data recovery procedure
Easy and smooth data recovery procedure Easy and smooth data recovery procedure

The straightforward and convenient interface substantially simplifies the work and eliminates the required efforts to just a couple of clicks. The recovered folders and files can be sorted by date, size, type and names while the search function allows looking for particular items. It is also possible to preview images, texts, PDF-documents or videos, save all the found data at once or select the needed folders or files.

Frequently asked questions

  • You can download the free Trial version of Network Storage Recovery for Synology NAS from this webpage and use it to make sure that the product corresponds to your requirements. The trial software will present all the recovered data and allow copying files with a size of less than 768 KB. Copying bigger files requires activation of the software license.
  • Download the application by pressing the "Free download" button on this webpage. Avoid using the drives of NAS from which the data was lost for saving this file. After that, you will get an executable installation file which can be run in your operating system. Open it and follow the instructions.
  • This expression means that the purchased license can be applied for data recovery from a single NAS unit. Once activated, it allows working with the chosen device without trial limitations. Such a licensing scheme doesn’t limit the options for software installation or the number of data recovery procedures, yet, the license remains valid only for a specific NAS box. Other devices, even of the same vendor, can be processed with trial limitations.
  • The license for the software will be provided after a one-time payment of the corresponding license fee. To place an order use the "Buy License" button on this webpage or the "Order license" button from the "License" dialog in the software interface. Verify the chosen license type and press "To Checkout". Fill out the billing form: The information needed for the purchase includes first name, last name, address, city, country and email address. All the data and the transaction will be securely processed by our sales partner 2Checkout according to the market security standards.
  • Our sales partner 2Checkout provides a variety of payment options, including Visa/MasterCard, PayPal, American Express, Discover, WebMoney, wire transfer, etc. and allows performing the payment in any currency. For more details, please, visit the global payments page on their website.
  • A Registration Code is issued to either the person's (entrepreneur’s) name or company's name once the payment is processed and is delivered to the email address specified in the order. The delivery is electronic and usually takes about 15-45 minutes.
  • A Registration Code will be sent to the email address specified in your purchase order. To activate the license, download a free Trial version of Network Storage Recovery for Synology NAS, launch the software and open the "License" dialog using the button in the upper right corner. Enter the name you specified in the purchase as well as the Registration Code in the corresponding fields and press "Apply license".
  • Download the updated version of Network Storage Recovery for Synology NAS from this webpage and follow the steps of "fresh" software installation. Alternatively, you can do that by following the prompts in the software interface.


Leave a review

Supported nas models
  • DS110j, DS111, DS112*, DS114*, DS115*, DS116, DS210j, DS710+, DS211*, DS212*, DS712+, RS212, DS213*, DS713+, DS214*, DS215*, DS216, DS716, DS410j, RS810*, DS411*, DS412*, RS812*, DS413*, DS414*, RS814+, DS415*, DS416*, DS1010j+, DS1512+, DS1513+, DS1812+, DS1813+.

Supported file systems for recovery
  • Ext4.

Supported file systems for reading
  • FAT/FAT32, ExFAT, NTFS, ReFS/ReFS3;

  • HFS+, APFS;

  • Ext2, Ext3, Ext4, UFS/UFS2, ReiserFS, XFS, JFS;

  • simple volumes with ZFS;

  • ESX(i) VMFS of VMware.

Raid support
  • Synology Hybrid RAID;

  • Most standard RAID patterns: SPAN, RAID 0, RAID 1, RAID 5, RAID 6.

Other supported technologies:
  • Disk encryption.

Additional tools and features
  • Auxiliary options: files preview, search, sorting, filtering and others.

Trial limitations
  • The software will copy files the size of which doesn't exceed 768 KB.

Supported host operating systems
  • Microsoft Windows®: starting from Windows® XP with Service Pack 3 and later.

Supported host computer architectures
  • Intel Architecture, 32-bit (IA-32, x86);

  • AMD64 (x86-64).

Minimal configuration
  • Any of the supported host operating systems;

  • at least 20 MB of free space on the disk for the executable files of the software;

  • at least 1 GB of RAM.

Recommended configuration
  • A 64-bit edition of any of the supported host operating systems;

  • over 1 GB of free space on the disk for the program and temporary files;

  • at least 4 GB of RAM and 4 logical cores CPU;

  • any web browser.